Features
¡ô Low power consumption
¡ô No lubricant for seals and No pollution by exhausted air. The valve can be used in food, medicine, and electronics industries etc.
¡ô Compact designed, high flow rate
¡ô Long life, up to multimillion
¡ô All models are equipped with lock function and manual operation button.
¡ô Two types: Standards and Explosion-proof. The explosion-proof type is Exm IIT4, T5, T6.
¡ô Type: The solenoid valves have two types 5/2 and 3/2. They have the same body. So it is easy to change between them.
¡ô According to your requirement, we can provide various solenoid valves.
Technical Parameter
|
Port Size |
G1/8¡å G1/4¡å G3/8¡å G1/2¡å |
|
Effective section area |
36 mm2 |
|
Media |
Dry and clean compressed air |
|
Working pressure range |
0.1¡«1.0MPa |
|
Temperature |
£10¡æ¡«£«60¡æ |
|
Interval |
0.05S |
|
Voltage range |
standard¡À10% |
|
Insulation class |
F¼¶ |
|
Power |
AC4.5VA 8.5VA DC=3.6W |
Installation
¡ô Choosing valve installation way should be based on the location, valve in the system occupies space requirements and convenient in maintenance comprehensive consideration. Currently installed ways mainly have the tube type, plate and flange and containers type, etc.
¡ô To not complex pneumatic system, tubular connection is simpler, but the loading and unloading maintenance inconvenience.
¡ô When loading and unloading valve plate connected not remove pipe, convenient in installation maintenance.
¡ô Flange are generally used to drift diameter valve.
¡ô If system chooses more the same type of valve, same specification optional containers valves, such not only convenient in maintenance, and save a space. So, when choosing, should according to the actual conditions.
Useing requirement
¡ô Before the installation, we should pay attention to the conditions of using. Such as the working pressure range, power supply conditions (ac, dc, voltage size), function, size etc. They should be compared with the tag or the instruction.
¡ô Before installation we should in carrying on experiment ventilation, and electricity test, check if the reversing performance is normal.
¡ô Before installation we should thoroughly remove the rust, dust and other dirt in the pipe.
¡ô Installation should pay attention to the valve installation location and indicate the airflow direction. We must install filter, regulator and lubrication before the solenoid valve. This ensures the supply flow is dry, clean, lubrication and the work is reliably. |
