¡ô A combination of electric Positioner (4-20mA input, Proportional)
¡ô By combination of spur gears, provide very high efficiency
and Transmitter (4-20mA continous output signal)
¡ô Auto-Calibration provides the most convenient to the end user without complicated set in Field.
¡ô Auto Calibration
¡ô Reverse Operation Direction
|
Incoming Power |
85~265V AC ¡À 10%, 50/60Hz ¡À 2% |
|
Option : 24VDC |
|
Potentiometer(Feedback) |
1 Kohm |
|
Input Signal |
4-20mA, 0-10VDC, 2-10VDC, 1-5VDC, 0-5VDC |
|
Output Signal |
4-20mA (Option:0-10VDC, 2-10VDC, 1-5VDC, 0-5VDC) |
|
Load Resistance |
Min. 100 Ohm ~ Max. 750 ohm |
|
Visual Indicators |
Operating LED (Power/Open/Close/Fault) |
|
Input Resistance |
250 ohms |
|
Exitation |
2.3 VDC (When User inputs the signal, the min power) |
|
Control Output |
Relay Contact 250V AC, 16A Max (Resistive Load) |
|
No of output contacts |
2 EA (Open and Close Contact) |
|
Delay Time Adjustment |
1.0 ~ 8.5 seconds (1step: 0.5 sec, 0~15 step) |
|
Dead Band Adjustment |
0.1 ~4.5% (1 step 0.3%, 0~15 step) |
|
Resolution |
Min 1/1,000 |
|
Ambient Temperature |
-10 ~ + 60 ¡æ |
|
Ambient Humidity |
90% RH MAX. (Non-Condensing) | |
